Scooter speed limiter
Speed Limiter 3.6-12v Voltage Regulator To perform the limitation it is necessary that the controller has a limitation cable, if it does not, it is not compatible.
Method of operation: Code erase function: Press the learn button 9 consecutive times.
The LED will flash 5 times and then turn off, indicating that the erase has been successful.
This will erase all previously learned remote control button codes.
(Note: If it is necessary to change the operating mode of the same remote control, erase the codes first and then proceed to relearn).
Interlock function: Press the learning button on the control board 3 consecutive times.
The LED indicator will flash once and then light up steadily to enter the learning mode.
At this time, press the button on the remote control that you want to pair, for example, button “A” to set the opening.
The LED indicator on the control board will flash 3 times and then light up again.
Next, set button “B” on the remote control for closing.
The LED indicator will flash 3 more times and then turn off, indicating that the learning has been successful.
